Products
RFTXX-250RM1313K Leaded Resistor RF Resistor
| Model | RFTXX-250RM1313K |
| Power | 250 W |
| Resistance | XX Ω~ (10-1000Ω Customizable) |
| Resistance Tolerance | ±5% |
| Capacitance | 2.0 PF@100Ω |
| Temperature Coefficient | <150ppm/℃ |
| Substrate | BeO |
| Cover | AL2O3 |
| Lead | Copper silver plating |
| Resistive Element | Thick Film |
| Operating Temperature | -55 to +150°C (See de Power De-rating) |
Suggested mounting procedures
Power De-rating
Reflow Profile
P/N Designation
Use attention
■ After the storage period of newly purchased components exceeds 6 months, attention should be paid to weldability before use. Storage is recommended for storage after vacuum packaging.
■Forming a small loop in the tab will act as a strain relief as the heat is dissipated.
■ The best heat conduction is required on the ground surface.
■ Manual welding lead out should be used at or less than 350 degrees of constant temperature solder iron, welding time controlled in 5 seconds.
■ In order to satisfy the drawings, it is necessary to install a large enough radiator. The metal surface and radiator need to be coated with a very thin layer of thermal conductive silicone grease.
■ If necessary, add air cooling or water cooling.
Explain:
■ Custom designs available RF Attenuators and RF Resistors and RF Terminations.
